173cc Gasoline Ground Hole Drill Earth Auger, Earth Drill Auger

Description

The traditional way of digging takes time and effort, and you can try something new and effective. Our post-hole digger is made of a variety of durable materials(aluminum alloy, steel, and plastic) to ensure that you can use it for a long time. Simple operating procedures allow you to easily complete various tasks. High power(3200w) and speed(3600rpm) can improve your work efficiency and save you time. It will be a good helper for your work.

Key Features

Build to Last: High-quality aluminum alloy, steel, plastic, and plastic spraying process make this product solid, wear-resistant, impact-resistant, and rustproof, so it can keep beautiful and practical without frequent replacement.

High Efficiency: The 173cc 4-stroke engine, 3200W power, 3600r/min speed, 0.26gallon oil tank, sharp spiral drill,and 9.0Nm torque provide you with strong power, so it can efficiently help you do various digging work.

Good Heat Dissipation: The air cooling model and multiple cooling holes can timely reduce the temperature in the process of operation and avoid potential safety hazards, thus extending the product's service life.

Save Money: The high-quality carburetor makes the gasoline fully burn when working, and the fuel consumption is only 395g/kw·h, so your cost can be saved.

Elaborate Design: This cordless item is powered by gasoline, which provides more convenience for you to use outdoors. The flameout switch on the handle allows fast shutdown for safer use.  

Low Noise: The exhaust muffler is used to reduce the noise disturbance for your trenching operation.

Simple Installation and Use: The detailed manual, T-shaped handle, and complete accessories ensure that you can complete the installation and start using it in a short time.

Effortless Cleaning: The smooth surface allows you to easily remove dust and residues with a towel and water.

Protective Shipping:Foam can better protect your product during transportation so that it can be delivered to you completely.

Details

Four-stroke Engine: Compared with two-stroke excavators, four-stroke has the characteristics of high power, fuel saving, environmental protection, and low noise, and has independent petrol and oil tanks that can be filled separately without matching.

Throttle Cable: The high-quality throttle cable makes the transmission stable and the response flexible.

Ball Bearing and Gear Drive: These two accessories can make the product run more smoothly and let you complete more work in a shorter time.

Four Handles: Four steel ergonomic handles are suitable for two people to operate together, providing you with safer and more convenient operation.

Application

This item is an ideal choice for rapid soil drilling. It allows easy setting of fence posts, trees, shrubs, poles, etc. on the ground, and can be widely used in homes, construction sites, farms, power systems, etc

How to Use

1. Add engine oil first, then gasoline.

2. After refueling, turn on the flameout switch (on the handle).

3. Press the red fuel pump on the carburetor 2-3 times.

4. Pull the starting handle to start the machine.

Specifications

Model: HJDZ-98-01

Color: Black & Yellow & Grey

Material: Aluminum Alloy, Steel, Plastic

Surface Treatment: Plastic Spraying

Uses: Digging Holes

Displacement: 173cc

Horse Power: 8HP

Engine Type: Single Cylinder Horizontal

Assembly Required: Yes

Mount Type: Floor-standing

Engine Stroke: 4-stroke

Fuel Consumption: 395g/kw·h

Cooling System: Forced Air

Ignition System: Capacitance Discharge Type

PTO Shaft Rotation: Vertical Shaft Output

Bore*Stroke: 70*45mm/ 2.76*1.77in

Theoretical Maximum Power: 3.2kW/3600rpm

Recommended Using Power: 2.4kW/3000rpm

Maximum Torque: 9.0N·m/2500rpm

Maximum Drill Diameter: 50cm/ 19.69in

Fuel Tank Volume: 1L/ 0.26Gal

Recommended GasolineType: Above 90 #

Drill  Size: 40(D)*80(H)cm/ 15.74*31.49inch

Hole Digger Total Length: 115cm/45.2inch

Hole Digger Total Width: 65cm/25.5inch

Total Height: 130cm/51.18inch

Height without Drill: 53cm/20.8inch

Head Size: 40*34cm/15.7*13.3inch

Hole Digger Package Size: 61*45*54cm/ 24.02*17.72*21.26in

Hole Digger Gross Weight: 26.8kg/ 59.08lbs

Drill Bit Gross Weight: 16.2kg/35.71lbs

Drill Bit Package Size: 40.5*40.5*81cm/15.94*15.94*3`.89inch

Package Included

1*Post Hole Digger

1* Drill

1* English Manual

All Accessories for Assembly

Notes

1. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.

2. Please wear safety glasses, gloves, and leg protectors to ensure safe use, and keep the product away from children.

3. Please note that the actual number, depth, and size of holes are related to the hardness of the land.

4. Please fill oil or gasoline in strict accordance with the specified oil hole.

5. Please note that the new machine cannot be used at high speed. Please run in at low speed for 3 hours (equivalent to 5 pots of oil).

6. Please do not stop the engine suddenly when running at high speed, otherwise, it will be difficult to start the engine next time.

7. Please note that there are strict size restrictions on the drill bit. Please do not modify or use the enlarged drill bit without permission. If you need another type of drill bit, please contact us directly.

8. Please do not use it on the grass with rubble, and clean the lawn debris before use to ensure the safe operation of the machine. Please note that this product is not suitable for use on ice.

9. Please rest for 10 minutes after working for half an hour each time, clean the spark plug and muffler carbon deposit every 50 hours, replace the oil filter, and add gear oil to the gearbox to extend the service life of the engine.

10. When you feel that the vibration of the machine is abnormal, please stop the machine immediately to check whether it is damaged, loose, or eccentric.

11. To ensure your safety, please note: do not add gasoline indoors to prevent fire; When the machine is running, do not put your hands and feet near the drill bit; The machine must be stopped when cleaning or checking.

12. When the machine is not used for a long time, the remaining fuel should be poured out, and then the machine should be started to burn all the fuel.

13. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.